imc STUDIO Software Download

imc STUDIO 5.2R12

imc STUDIO 5.2R12 is the new standard delivery version as of 2019-11-15 and replaces the previous version.
Including imc WAVE and the firmware and devices driver package imc DEVICES 2.13R3.

imc STUDIO demo (30-day full version)

imc STUDIO

Download (2.0 GB) without the following additional components: imc FAMOS, imc SENSORS, imc Format Converter and third party devices

imc STUDIO

Download (3.6 GB) including: imc FAMOS, imc SENSORS, imc Format Converter, third party devices and imc WAVE

Notes:

  • This current version will replace all earlier versions of imc STUDIO.
    We generally recommend to always use the latest release version, provided on this page for download.
  • In case you currently work with an imc STUDIO 5.2 revision earlier than R7, we strongy advise you to update [IT#30949].
    If you have any questions, our imc hotline will be happy to help you.
  • The Update from imc STUDIO 5.0 or older to imc STUDIO 5.2 is not for free.

What is new?

Older Versions

An archive with earlier versions of imc STUDIO (complete packages including their corresponding imc DEVICES firmware and device drivers) is provided at: imc CLOUD.

 

Firmware and Driver: imc DEVICES

In the document "Info_imc_STUDIO_vs_imc_DEVICES" you will find detailed information about the following topics:

  • Rules and guidelines on compatibility
  • Operating multiple versions of imc DEVICES simultaneously
  • Installation procedures
  • AddOns vs. Revisionsl

The update from imc DEVICES 2.6 or older to imc DEVICES 2.13 is not for free.

Tools

Safety certificate imcCert.cpt for imc REMOTE SecureAccess

The imc REMOTE SecureAccess allows direct and secure access to a device, even with activated Firewall. Only imc devices having serial numbers 14000 and higher are supported, for which the associated activation code has been provided.

For transfer via a secure https-access, the "imcCert.cpt" certificate is necessary.

For the activation, please go to

Setup -> Configuration -> Device properties

into the Device configuration. Under Access protection (right column), you can navigate to the certificate. Please select the certificate "imcCert.cpt", which you have downloaded before and saved under the installation path under Firmware\Idif\, e.g. "C:\Program Files (x86)\imc\imc_DEVICES_2.9R4\Firmware\Idif".

This certificate is valid until 27.03.2020 and must be replaced upon expiration.

 


Repair Tool

  • Please copy the Repair.exe and the dirrepair.bat in the corresponding archive with the defect files and then run the dirrepair.bat in a DOS-window. After that it should be possible to open the files.
Top